Bitmap left a bunch of good reloading information on my Sunday post. For anyone interested in reloading you should check it out. I agree with what Bitmap is saying, but my problem is that the 7.62x51mm round is not the same as a .308 Winchester. The specs call for a 12,000 difference in pressure. So I could shoot 7.62x51mm out of my bolt action, but not the other way around.
Now I do use the same components. A Large rifle primer, H4895 powder and a 168grain HPBT. I use 39 grains of powder for the 7.62x51mm and 40.2 grains for the .308 Winchester. This gives me about 2 MOA from the M1A, and 3/4 MOA from the Remington 700. If I use 7.62x51mm in my Remington, I shoot about 3 MOA.
I've found that if I load the rounds long, I can squeak another 1/4 MOA of of my Remington 700, but the rounds will not load into the internal magazine. So my hunting ammo is 2.80 COAL, where my bench rounds are 2.92 COAL. I could easily seat the bullets deeper if the poop hit the fan, so that's not an issue.
Yesterday, I put 7 rounds into 3/4" at 100 yards. Five of them were in 1/4" or so. Now that's zombie hunting! If I could get a bit more consistent, I could get to the 1/2" MOA I am seeking for egg shoots.
I don't mind having different loads for each rifle. Each weapon has it's own purpose, and these don't overlap with each other. The M1A is a battle rifle, and 2 MOA is plenty. The Remington 700 is to put food on the table and to pull headshots on zombies out to 600 yards. The shotgun is for food on the table and close-quarters assault. If I ever have to kick in doors, that's what I'll use. The Sig220 is for personal protection. The .22's are for practice, small game and varmit shooting.
Thankfully, I have all the bases covered. I would love to buy a few more weapons, but considering my financial situation, I can easily make due with what I have.
Bitmap, thanks for the information! I've never used AA powders. I use H4895 for the rifles, Unique and Blue Dot for pistol, and Clays for the shotgun. I weigh my bullets for the rifle and use the odd ones for the M1A. Only those that weigh exactly 168.0 grains are used for the Remington 700. I use the Nosler Balistic Tip and Combined Technologies for hunting, and Nosler Competition HPBT for the bench shooting and the M1A rounds. For primers I prefer use CCI large rifle because they do not slam-fire like the others in the M1A. I use the bench rest version for the Remington 700. The bench rest primers are about 50% more expensive, but I have 2000 of them already :p
I need to shop around and do some research on 168 grain bullets. I'm concerned the thin-skinned 168 grain Nosler competition HPBT won't be effective enough at stopping zombies. I could use 168 grain ballistic tips, but they are about 5 times as expensive. I'd like to run some tests to see the differences, maybe in the spring I can.
Showing posts with label reloading. Show all posts
Showing posts with label reloading. Show all posts
Tuesday, November 17, 2009
Thursday, February 12, 2009
Preps Preps Preps!
Got to keep prepping. It's a mantra when I finally get home and get some dinner in my belly. Every day, and I mean EVERY DAY, I do at least 2-3 tasks for prepping.Last night I cleaned the house, but I also organized all my batteries. I had more than I thought, but down the road I'll buy another pack of AA's and AAA's and some more D's. I also went and cleaned ~400 .45ACP brass, and prepared the .308 brass I shot on Sunday.
So military brass has a problem that needs to be addressed before you can reload it. First off, it needs to be boxer primed. Then you shouldn't use your standard deprimer to deprime the brass. I have heard you can, but the deprimer is a few bucks and that's cheaper than the pin in your sizer! The reason is the primer pocket has a crimp. Once you get it deprimed you need to remove this crimp with a tool. I got one for $3 that will chamfer the inside and outside of the case mouth and remove this crimp from the primer pocket. I wouldn't want to do it to more than 50 cases though. Tough on the hands.
I need to get me some finer media for my case tumbler. It gets stuck in the primer hole, and I need to use a bent paper clip to poke it out. Very time consuming!
I also educate myself as best I can when home as well. I hit all the web sites that are banned from work, and try to read something when it's time for bed. Soon it's garden time. I'm going to try to get the cabbage seed planted tonight.
I'm supposed to go out drinking Friday night, so not much prepping going on tomorrow night. So I need to get 75 or so skeet loads done tonight. I already have 25 LRN rounds for the .45, I'd like to test my new grips. I also want to shoot the M1A, I need to start working up a load for the 500+ 168grain bullets I ordered the other day. Working up a load is a time consuming process, as the hottest load is not the necessarily the best. I want the smallest group with the most energy.
The M1A is not a sniper rifle. I wonder if it's a 2 or a 3 MOA rifle, and I'll figure this out along the way as I work up the load. Un comparison my bolt action is a 1/2 MOA rifle. MOA is short for Minute of Angle, or 1/60th of 1 degree. 1MOA is about 1 inch at 100 yards. 2 inches at 200 yards, and so on.
I learned of a primer that might cut my bolt action to a 1/4 MOA rifle. CCI makes a primer specifically for bench shooting. These primers are NOT for a semi-auto rifle because of slam-fire. But in my bolt action they should be amazing. The problem is they are $50 for 1000, about twice as expensive as regular large rifle primers. Actually that's not bad as I thought. I'm buying a brick just to see.
I should do a quick rundown on how I load a rifle and pistol round for the blog. Expect to see this soon.
Well that's enough rambling for now. I wish I had a keen insight into the political or economic situation this country is in, but I've come up empty today. I should check to see how much $ we are still sending overseas in aid. Don't you think this money would be helpful to our economy? then again it depends if we are sending cash or goods. sending goods is good, writing a check is bad.
Keep prepping everyone, warm weather and higher crime rates are coming.
So military brass has a problem that needs to be addressed before you can reload it. First off, it needs to be boxer primed. Then you shouldn't use your standard deprimer to deprime the brass. I have heard you can, but the deprimer is a few bucks and that's cheaper than the pin in your sizer! The reason is the primer pocket has a crimp. Once you get it deprimed you need to remove this crimp with a tool. I got one for $3 that will chamfer the inside and outside of the case mouth and remove this crimp from the primer pocket. I wouldn't want to do it to more than 50 cases though. Tough on the hands.
I need to get me some finer media for my case tumbler. It gets stuck in the primer hole, and I need to use a bent paper clip to poke it out. Very time consuming!
I also educate myself as best I can when home as well. I hit all the web sites that are banned from work, and try to read something when it's time for bed. Soon it's garden time. I'm going to try to get the cabbage seed planted tonight.
I'm supposed to go out drinking Friday night, so not much prepping going on tomorrow night. So I need to get 75 or so skeet loads done tonight. I already have 25 LRN rounds for the .45, I'd like to test my new grips. I also want to shoot the M1A, I need to start working up a load for the 500+ 168grain bullets I ordered the other day. Working up a load is a time consuming process, as the hottest load is not the necessarily the best. I want the smallest group with the most energy.
The M1A is not a sniper rifle. I wonder if it's a 2 or a 3 MOA rifle, and I'll figure this out along the way as I work up the load. Un comparison my bolt action is a 1/2 MOA rifle. MOA is short for Minute of Angle, or 1/60th of 1 degree. 1MOA is about 1 inch at 100 yards. 2 inches at 200 yards, and so on.
I learned of a primer that might cut my bolt action to a 1/4 MOA rifle. CCI makes a primer specifically for bench shooting. These primers are NOT for a semi-auto rifle because of slam-fire. But in my bolt action they should be amazing. The problem is they are $50 for 1000, about twice as expensive as regular large rifle primers. Actually that's not bad as I thought. I'm buying a brick just to see.
I should do a quick rundown on how I load a rifle and pistol round for the blog. Expect to see this soon.
Well that's enough rambling for now. I wish I had a keen insight into the political or economic situation this country is in, but I've come up empty today. I should check to see how much $ we are still sending overseas in aid. Don't you think this money would be helpful to our economy? then again it depends if we are sending cash or goods. sending goods is good, writing a check is bad.
Keep prepping everyone, warm weather and higher crime rates are coming.
Thursday, January 1, 2009
The Economics of Reloading
Western mass. man asked what are the economics of reloading ammunition. So I went down to NSB's (Natog's Sekret Bunker) ballistics lab and sat down with excel and figured it out.
You need four components to make a bullet. You need the brass cartridge, an appropriate primer, powder and a bullet. I just took the prices I paid for the small amounts I purchased, things get much cheaper in bulk. So everyone grab a drink,and let's talk math!
First on the list is brass. If you have to buy it new, it's $40 for 100 of the average quality. Remington or Winchester are good examples. If you go all out for the real premium stuff, it's a $1 a round, $.80 each in quantity. The good brass will be more accurate and is better for target shooting. One fellow who uses it says it will last forever, the rounds he was using were 8 years old, and he shoots once a week!
Now I will get more than 10 reloads per brass, but it's a nice round number to work with. So $40 per 100 brass, that you can use 10 times is 4¢ per reloaded round.
Now I don't have the numbers for FMJ rounds. I never signed the Geneva Conventions so I'll be firing soft point bullets at any bad guys. 165grain hunting hollow points are $30 per 100, so 30¢ a piece. The premium ballistic tips are $23 per 50 rounds, or 46¢ each. I haven't tried them yet, but they look promising. Let's use the regular hunting rounds.
Primers cost me $30 per 2000, or 2¢ each. This is for the CCI Large Rifle primers. The Federal #210's are a little more pricey.
There are 7000 grains per pound, and I'm using 40.2 grains per round. I paid $23 for a pound, and after doing all the math it's 13¢ worth of powder in each round.
So the grand total is 49¢ a round. If I walk into a gun shop and buy hunting bullets, they are $18 for 20 rounds, or 90¢ each.
So for about half the cost I reload my own. There is more to it than that, though. I can develop and test rounds that deliver the best possible performance for my rifle. From what I have seen, handloading doubles the accuracy of the rifle. So my 1 MOA Remington 700 is a 1/2 MOA with handloads.
Remember these are for small quantities. Buying in bulk once you figure out what works best for you and your weapon will increase the savings substantially.
For my .45 ACP pistol here are the numbers:
$50 Press (used)
$80 Rifle dies
$25 Carbide pistol dies
$20 Rifle trim die (better than that crappy thing with teeth)
$20 Pistol trim die
$160 Good electronic scale
$10 Powder trickler
$2 Lee primer pocket cleaner
$7 Case neck brush
$9 Flash hole uniformer - optional
$30 Calipers
$5 Lee case chamfer tool
$15 Two reloading trays
$30 Good reloading book
$8 Shell holder (.45 ACP and .308 use same one)
That's $471 bucks worth of gear, and you can easily spend more. But if you spend your money wisely these items will never wear out, providing you with a lifetime of ammunition.
The one thing that is missing from this equation is time. It can take a while to hand craft twenty rifle rounds. I just kick back with a cold soda and knock it out. It's just part of my preps to me.
Also I would like to point out you do not need to store 1,000 rounds for each rifle, just the components to reload them, with extra brass for ones you loose. For my .308 I'll put up 100 rounds and keep supplies for a few hundred more. Once I get a battle rifle it will be different, for now that's enough for me. I'm ordering some JHP's for my .45 and I'll work up a load for those and then I'll be all set there too.
I hope you all found this as helpful as I did. Once I start buying in bulk I'll re-do the numbers and give you an update. If your going to get started go used! Dies and presses do not wear out, so used is as good as new! Also brass is available used for sale, or for scrounging. Stick with common calibers, so you minimize the expense of dies and components. I was going to reload tonight but since I have a few beers wile doing math, I think I'll watch the latest Sarah Conner Chronicles tonight. Good luck out there and be safe!
You need four components to make a bullet. You need the brass cartridge, an appropriate primer, powder and a bullet. I just took the prices I paid for the small amounts I purchased, things get much cheaper in bulk. So everyone grab a drink,and let's talk math!
First on the list is brass. If you have to buy it new, it's $40 for 100 of the average quality. Remington or Winchester are good examples. If you go all out for the real premium stuff, it's a $1 a round, $.80 each in quantity. The good brass will be more accurate and is better for target shooting. One fellow who uses it says it will last forever, the rounds he was using were 8 years old, and he shoots once a week!
Now I will get more than 10 reloads per brass, but it's a nice round number to work with. So $40 per 100 brass, that you can use 10 times is 4¢ per reloaded round.
Now I don't have the numbers for FMJ rounds. I never signed the Geneva Conventions so I'll be firing soft point bullets at any bad guys. 165grain hunting hollow points are $30 per 100, so 30¢ a piece. The premium ballistic tips are $23 per 50 rounds, or 46¢ each. I haven't tried them yet, but they look promising. Let's use the regular hunting rounds.
Primers cost me $30 per 2000, or 2¢ each. This is for the CCI Large Rifle primers. The Federal #210's are a little more pricey.
There are 7000 grains per pound, and I'm using 40.2 grains per round. I paid $23 for a pound, and after doing all the math it's 13¢ worth of powder in each round.
So the grand total is 49¢ a round. If I walk into a gun shop and buy hunting bullets, they are $18 for 20 rounds, or 90¢ each.
So for about half the cost I reload my own. There is more to it than that, though. I can develop and test rounds that deliver the best possible performance for my rifle. From what I have seen, handloading doubles the accuracy of the rifle. So my 1 MOA Remington 700 is a 1/2 MOA with handloads.
Remember these are for small quantities. Buying in bulk once you figure out what works best for you and your weapon will increase the savings substantially.
For my .45 ACP pistol here are the numbers:
Brass: $24 per 100 times 10 reloads = 2¢Now there is a big outlay of cash up front for all the supplies. I got lucky twice with a free press and all the dies, loading blocks, etc. from when I bought my rifle. Up at Kittery Trading Post I saw many presses for sale used, from $40 on up. They had used dies as well. Here is a list off all the stuff, and how much it goes for retail.
Bullets: $60 per 500 for lead round nose = 12¢
Primers: $30 per 3000 = 1¢
Powder: $17 per pound, 5.3 grains per round = >1¢
Total: 17¢ per round. Reloads at the gun store are $13 per 50 rounds or 26¢ each. turns out .45 ACP is easy on the brass to relaod, so you can get many more reloads then the 10 I have used in these numbers.
$50 Press (used)
$80 Rifle dies
$25 Carbide pistol dies
$20 Rifle trim die (better than that crappy thing with teeth)
$20 Pistol trim die
$160 Good electronic scale
$10 Powder trickler
$2 Lee primer pocket cleaner
$7 Case neck brush
$9 Flash hole uniformer - optional
$30 Calipers
$5 Lee case chamfer tool
$15 Two reloading trays
$30 Good reloading book
$8 Shell holder (.45 ACP and .308 use same one)
That's $471 bucks worth of gear, and you can easily spend more. But if you spend your money wisely these items will never wear out, providing you with a lifetime of ammunition.
The one thing that is missing from this equation is time. It can take a while to hand craft twenty rifle rounds. I just kick back with a cold soda and knock it out. It's just part of my preps to me.
Also I would like to point out you do not need to store 1,000 rounds for each rifle, just the components to reload them, with extra brass for ones you loose. For my .308 I'll put up 100 rounds and keep supplies for a few hundred more. Once I get a battle rifle it will be different, for now that's enough for me. I'm ordering some JHP's for my .45 and I'll work up a load for those and then I'll be all set there too.
I hope you all found this as helpful as I did. Once I start buying in bulk I'll re-do the numbers and give you an update. If your going to get started go used! Dies and presses do not wear out, so used is as good as new! Also brass is available used for sale, or for scrounging. Stick with common calibers, so you minimize the expense of dies and components. I was going to reload tonight but since I have a few beers wile doing math, I think I'll watch the latest Sarah Conner Chronicles tonight. Good luck out there and be safe!
Tuesday, October 28, 2008
Just too much going on
Well things are going bonkers in a major way. At work we have that security patch to hit all of our servers with. At home I'm reading up on what's going on with the election and the economy. And trying to relax some for the next days work. Then trying to get a good nights sleep. Fat chance of that happening.
I have reloaded about 75 shotgun shells so far for skeet. It's easy enough to do, but there seems to be a trick to get the shells to stay closed tightly. Some shells I just need to hold in the pres for 2-3 seconds and they are fine, others will open up no matter what I do. Some shells seem to not want to close correctly, leaving a hole big enough for shot to leak out of - I just jammed a little paper in there to hold it and marked the shell with a marker so I'd toss it.
I still have to test these shells to see if they are up to snuff. They look just like the shells the other guys have reloaded, so my confidence is high. I'm not using a lot of powder either, so I'm not too worried it will blow up in my face.
I am buying a book on shotgun shell reloading, It will have better info than the manual that came with the press, and I hope it has more info on how to load oo buck, including what wads to buy. I want to store up a bunch of oo buckshot, makes a good home defense round.
Onto other preps. My mylar bags and O2 absorbers have arrived! Now I can move up to the "big leagues" and add grain storage to my preps. If you are going to store for very long term, you cannot beat whole wheat in mylar bags. It should last 15 years at least!
Now I just need a flour mill. If push comes to shove I can grind it like they do in 3rd world contries. Not sure how they do that, but I'll look it up online soon.
I just went through the post I made in August about what I'd like to have done before winter. And I've met most of my goals. I still want to buy a generator, but I just cannot swing that much cash right now. I need supplies for my Jeep, mostly spare parts, but that is of secondary importance to food. I really, really want to get my hands on a battle rifle as well. Saving is hard enough, but I am saving some every week for this.
It's a never-ending project, just like owning a house. With the progress I have made in my physical preps and in my increased knowledge, I am getting more confident that I will survive the oncoming problems. Even with a blizzard or two thrown in. If you are not prepping then start. It's not too late to start stacking the deck in your favor.
I have reloaded about 75 shotgun shells so far for skeet. It's easy enough to do, but there seems to be a trick to get the shells to stay closed tightly. Some shells I just need to hold in the pres for 2-3 seconds and they are fine, others will open up no matter what I do. Some shells seem to not want to close correctly, leaving a hole big enough for shot to leak out of - I just jammed a little paper in there to hold it and marked the shell with a marker so I'd toss it.
I still have to test these shells to see if they are up to snuff. They look just like the shells the other guys have reloaded, so my confidence is high. I'm not using a lot of powder either, so I'm not too worried it will blow up in my face.
I am buying a book on shotgun shell reloading, It will have better info than the manual that came with the press, and I hope it has more info on how to load oo buck, including what wads to buy. I want to store up a bunch of oo buckshot, makes a good home defense round.
Onto other preps. My mylar bags and O2 absorbers have arrived! Now I can move up to the "big leagues" and add grain storage to my preps. If you are going to store for very long term, you cannot beat whole wheat in mylar bags. It should last 15 years at least!
Now I just need a flour mill. If push comes to shove I can grind it like they do in 3rd world contries. Not sure how they do that, but I'll look it up online soon.
I just went through the post I made in August about what I'd like to have done before winter. And I've met most of my goals. I still want to buy a generator, but I just cannot swing that much cash right now. I need supplies for my Jeep, mostly spare parts, but that is of secondary importance to food. I really, really want to get my hands on a battle rifle as well. Saving is hard enough, but I am saving some every week for this.
It's a never-ending project, just like owning a house. With the progress I have made in my physical preps and in my increased knowledge, I am getting more confident that I will survive the oncoming problems. Even with a blizzard or two thrown in. If you are not prepping then start. It's not too late to start stacking the deck in your favor.
Wednesday, October 22, 2008
Supplies delivered
So last night I had the Lee Load-All II waiting for me when I got home. I could not resist and ripped open the box, poked around at it, then sat down and read the instructions carefully three times. Reloading ammunition is nothing to do half-assed. So before I start reloading I'll re-read the instructions a 4th time. Seems pretty straightforward, but last thing I want from a shotgun is a surprise!
I took some crappy hulls I had and checked out how to pop out the old primer, and how to walk though each stage (no powder or shot though) to see how it all works. I have to admit it seems like it will do a fine job. Although it is going to be kinda slow going. I'll only be reloading the freshest hulls I have to start, and bring some of the crappy ones to the club to ask the more experienced loaders what's good to reload and what is best to toss out.
Hopefully, I will be able to swing by the gun shop tonight to pick up 1oz wads, a 1# bottle of Clays powder, some primers(with closed flash hole), and #8 shot to make some skeet rounds for this weekend. No sense in buying a lot of materials while I am looking for the right combination of sullpies will work best for me and my shotgun.
My mylar bags and O2 absorbers shipped yesterday, so next weekend I'll swing by the Agway and buy me two 50# sacks of hard red winter wheat to put up. So I have lots going on on the prep front! Still waiting for the bulk of my heirloom seeds though... I hope they get here soon!
I took some crappy hulls I had and checked out how to pop out the old primer, and how to walk though each stage (no powder or shot though) to see how it all works. I have to admit it seems like it will do a fine job. Although it is going to be kinda slow going. I'll only be reloading the freshest hulls I have to start, and bring some of the crappy ones to the club to ask the more experienced loaders what's good to reload and what is best to toss out.
Hopefully, I will be able to swing by the gun shop tonight to pick up 1oz wads, a 1# bottle of Clays powder, some primers(with closed flash hole), and #8 shot to make some skeet rounds for this weekend. No sense in buying a lot of materials while I am looking for the right combination of sullpies will work best for me and my shotgun.
My mylar bags and O2 absorbers shipped yesterday, so next weekend I'll swing by the Agway and buy me two 50# sacks of hard red winter wheat to put up. So I have lots going on on the prep front! Still waiting for the bulk of my heirloom seeds though... I hope they get here soon!
Monday, October 20, 2008
Brisk!
Wow, it was pretty damn cold this morning. Until DST is taken off I get up before sun-up to begin my long ride to Boston. It was 30 degrees at the house when I let the dogs out this morning. My body is in summer mode, so anything below 50 feels chilly. By November I should be adjusted and can resume wearing shorts down to below freezing again.
I got my first package of seeds last week. Mainly herbs and salad greens from this company, but I did pick up another variety of beans. Appropriately named "Mayflower Beans" They took the trip to Plymouth with the Pilgrims. I hope I get the other shipment this week. That one contains the bulk of my items for next years garden.
I wonder If I should just toss them in an ammo can in the basement, or If I need something special. I wonder if they need to breathe at all while stored. If you have any advise please leave a comment.
I shot Skeet this weekend, and I manged to score a 22. Not bad for a 20" straight bore barrel on a tactical shotgun. I have to admit I like the gun club, they never gave me crap about it, and now we give each other crap. They taunt me with my "1/2 a shot gun" and I give them hell with "You need to upgrade, I hit that station with this." or "Your shotgun needs a flashlight on it, that's your problem"
I ordered that reloader last week so it should be here in the next couple of days. I scavenged a lot of hulls from the field, plus all the ones I've saved, and another shooter gave me a garbage bag full of hulls last week. I got at least 1000 hulls ready. The problem is that most of them have steel bases. These are fine, and unlike rifle rounds, can be reloaded safely. Most hulls give you 6-8+ reloads before the plastic breaks down. Once the reloader shows up I need to go to the local gun shop and pick up a pound of sporting clays powder, some wads and some #8 shot. I'll load 3-4 shells, then go to the range to see if I can blow myself up.
Once I get some reloading experience under my belt, I think I'm going to load buckshot. I will not use the steel-based hulls, as the intention is to store ammunition long-term for home defense and food acquisition. I have no illusions that this is going to be the best ammo around. It is better than nothing, and being able to load up 200ish rounds to store as part of my preps in case of mutant zombie attack is a sensible thing to do since it's going to be cheap.
The gun club offers members deep discounts on boxes of 5000 primers, #8 shot, and several powders. Since I'm just starting out I plan on buying small quantities until I find what I like for a load, then invest in the bulk quantities. Ideally, I want to just change the amount of powder, the wad and the shot. There will be some experimentation, but I assure you that I will be starting conservative and working my way up.
Now I did spend time re-organizing my preps this weekend, and I need to add some shelf space in my stash. I bought some plastic tubs at 40% off the weekend before, and put them to good use filling them with pasta. I'll be going to BJ's tonight to stock up on some bulk items. Speaking of which I got to track down my order of mylar bags and O2 absorbers! Well THAT company's not getting any return business from me.
Well be safe out there everyone, I got to do me some research on Question #1, which will repeal income tax in Mass. Basically, it means the property taxes will go through the roof, but I want to be well educated before I say boo on the subject.
Remember to invest in tangibles, Stock up on fuel since it's so cheap!
I got my first package of seeds last week. Mainly herbs and salad greens from this company, but I did pick up another variety of beans. Appropriately named "Mayflower Beans" They took the trip to Plymouth with the Pilgrims. I hope I get the other shipment this week. That one contains the bulk of my items for next years garden.
I wonder If I should just toss them in an ammo can in the basement, or If I need something special. I wonder if they need to breathe at all while stored. If you have any advise please leave a comment.
I shot Skeet this weekend, and I manged to score a 22. Not bad for a 20" straight bore barrel on a tactical shotgun. I have to admit I like the gun club, they never gave me crap about it, and now we give each other crap. They taunt me with my "1/2 a shot gun" and I give them hell with "You need to upgrade, I hit that station with this." or "Your shotgun needs a flashlight on it, that's your problem"
I ordered that reloader last week so it should be here in the next couple of days. I scavenged a lot of hulls from the field, plus all the ones I've saved, and another shooter gave me a garbage bag full of hulls last week. I got at least 1000 hulls ready. The problem is that most of them have steel bases. These are fine, and unlike rifle rounds, can be reloaded safely. Most hulls give you 6-8+ reloads before the plastic breaks down. Once the reloader shows up I need to go to the local gun shop and pick up a pound of sporting clays powder, some wads and some #8 shot. I'll load 3-4 shells, then go to the range to see if I can blow myself up.
Once I get some reloading experience under my belt, I think I'm going to load buckshot. I will not use the steel-based hulls, as the intention is to store ammunition long-term for home defense and food acquisition. I have no illusions that this is going to be the best ammo around. It is better than nothing, and being able to load up 200ish rounds to store as part of my preps in case of mutant zombie attack is a sensible thing to do since it's going to be cheap.
The gun club offers members deep discounts on boxes of 5000 primers, #8 shot, and several powders. Since I'm just starting out I plan on buying small quantities until I find what I like for a load, then invest in the bulk quantities. Ideally, I want to just change the amount of powder, the wad and the shot. There will be some experimentation, but I assure you that I will be starting conservative and working my way up.
Now I did spend time re-organizing my preps this weekend, and I need to add some shelf space in my stash. I bought some plastic tubs at 40% off the weekend before, and put them to good use filling them with pasta. I'll be going to BJ's tonight to stock up on some bulk items. Speaking of which I got to track down my order of mylar bags and O2 absorbers! Well THAT company's not getting any return business from me.
Well be safe out there everyone, I got to do me some research on Question #1, which will repeal income tax in Mass. Basically, it means the property taxes will go through the roof, but I want to be well educated before I say boo on the subject.
Remember to invest in tangibles, Stock up on fuel since it's so cheap!
Subscribe to:
Posts (Atom)